Electromet Corp. is undertaking the building of a 16,000 square-foot storage facility at our campus at 829 Commonwealth Ave., Hagerstown, MD. This new facility continues our technical capabilities and facilities expansion, to better serve our clients in the defense […]
Electromet is pleased to announce the funding of the Electromet Corporation Scholarship/Internship Program at Shippensburg University.
For more than thirty years, David O. McCain III ’84M, has worked as president and CEO of Electromet […]
In November 2017, Electromet increased its capacity to cure painted parts by installing an additional Grieve Walk-In Gas Fired Batch Oven (Model WRC666-500) in its Hagerstown, MD fabrication facility.
The WRC666-500 model has an internal work space of 72″ x 72″ x 78″ and […]
Electromet is pleased to announce the appointment of Dixon Hicks as Electromet’s Executive Vice President. Dixon will begin his duties on Monday, October 2, reporting directly to Electromet’s President, David O. McCain.
As Executive Vice President, Dixon will assume most executive functional responsibilities with Senior Managers and Directors reporting to him. […]
In June 2017, Electromet enhanced its precision measuring capability by installing a Wenzel Precision GmbH Xorbit 107 Coordinate Measuring Machine in its Hagerstown, MD machining facility.
This CMM can support an envelope of 1,000 mm (39.37 inches) x 2,000 mm (78.74 inches) x 700 mm (27.56 inches) and gives Electromet a […]
In February 2017, Electromet increased its forming capacity by installing an additional Amada 2.5m x 88 Ton HS8025/8 Axis High Speed CNC Press Brake in its Hagerstown, MD fabrication facility.
This is the second 88 Ton Amada added within the past year and is an integral part of Electromet’s continuing capacity […]
In January 2017, Electromet enhanced its CNC machining capability by installing a HAAS VS-3/50 CNC machining center in its Johnstown, PA machining facility. This CNC can support a machining envelop of 150 x 50 x 50 inches and gives Electromet a significant capability boost.
The extremely large envelop of the HAAS […]
Electromet Corporation was recognized as a Silver Sustaining Member by the Maryland World Class Consortia (MWCC) for twenty years of continuous membership support. MWCC and Electromet are dedicated to the Continuous Improvement journey.
The Consortia is a collaborative effort; a non-profit organization built and sustained through the involvement of state and […]
Part of Electromet’s 2014 Continuous Process Improvement Plan called for the addition of several Process Improvement technologies that will serve to eliminate waste in the value stream and that will provide more value to our customers.
These improvements include:
CO2 Laser Engraver – added to eliminate the need for the special technical […]
In June, Electromet enhanced its CNC machining capability by installing a HAAS VF-7/40 CNC machining center in its Hagerstown, MD machining facility. This CNC can support a machining envelop of 84 x 32 x 30 inches and has 3-4 axis capability. Electromet has two machining facilities, one located adjacent to […]