In April 2021, Electromet enhanced its CNC machining capability by installing a HAAS VF-9/40 CNC machining center in its Hagerstown, MD machining facility. This CNC can support a machining envelop of 84 x 40 x 30 inches and has 3-4 axis capability.
Electromet also upgraded its waterjet to a OMAX MAXIEM […]
In September 2020, Electromet enhanced its CNC machining capability by installing a HAAS GM-2 CNC machining center in its Hagerstown, MD machining facility.
This Gantry 5-Axis CNC can support a machining envelop of 145 x 87.5 x 39.4 inches and gives […]
In July 2020, Electromet enhanced its fabrication capability by installing a Trumpf Trupunch 1000 in its Hagerstown, MD fabrication facility. This punch can support an envelope of 48 x 120 inches and gives Electromet a significant capability and capacity boost.
The Trupunch 1000 includes countersinking and tapping into a single operation. […]
In July 2019, Electromet enhanced its CNC machining capability by installing a HAAS VF-9/40 CNC machining center in its Hagerstown, MD machining facility. This CNC can support a machining envelop of 84 x 40 x 30 inches and has 3-4 axis capability.
In June 2017, Electromet enhanced its precision measuring capability by installing a Wenzel Precision GmbH Xorbit 107 Coordinate Measuring Machine in its Hagerstown, MD machining facility.
This CMM can support an envelope of 1,000 mm (39.37 inches) x 2,000 mm (78.74 inches) x 700 mm (27.56 inches) and gives Electromet a […]
In February 2017, Electromet increased its forming capacity by installing an additional Amada 2.5m x 88 Ton HS8025/8 Axis High Speed CNC Press Brake in its Hagerstown, MD fabrication facility.
This is the second 88 Ton Amada added within the past year and is an integral part of Electromet’s continuing capacity […]
In January 2017, Electromet enhanced its CNC machining capability by installing a HAAS VS-3/50 CNC machining center in its Johnstown, PA machining facility. This CNC can support a machining envelop of 150 x 50 x 50 inches and gives Electromet a significant capability boost.
The extremely large envelop of the HAAS […]
In October 2012, Electromet enhanced its CNC machining capability by installing a HAAS VF-9/40 CNC machining center in its Johnstown, PA machining facility. This CNC can support a machining envelop of 84 x 40 x 30 inches and has 3-4 axis capability.
It also installed a HAAS VF-4SS CNC machining center […]
In June, Electromet enhanced its CNC machining capability by installing a HAAS VF-7/40 CNC machining center in its Hagerstown, MD machining facility. This CNC can support a machining envelop of 84 x 32 x 30 inches and has 3-4 axis capability. Electromet has two machining facilities, one located adjacent to […]
Electromet welcomes Congressman Mark Critz, for the ribbon-cutting ceremony to officially open our new Electromet facility in Johnstown, PA.
Above, from left:
Bob Heffelfinger, Richland Township Supervisor; Terry Wood, Technical Director; Pam Shatzer, Production Manager; Paul Assia, Johnstown Machine Shop Manager; Vladimir Brajovic, Quality Manager; David McCain, Electromet President; Congressman Mark Critz.
