In November 2017, Electromet increased its capacity to cure painted parts by installing an additional Grieve Walk-In Gas Fired Batch Oven (Model WRC666-500) in its Hagerstown, MD fabrication facility.
The WRC666-500 model has an internal work space of 72″ x 72″ x 78″ and […]
In June 2017, Electromet enhanced its precision measuring capability by installing a Wenzel Precision GmbH Xorbit 107 Coordinate Measuring Machine in its Hagerstown, MD machining facility.
This CMM can support an envelope of 1,000 mm (39.37 inches) x 2,000 mm (78.74 inches) x 700 mm (27.56 inches) and gives Electromet a […]
In February 2017, Electromet increased its forming capacity by installing an additional Amada 2.5m x 88 Ton HS8025/8 Axis High Speed CNC Press Brake in its Hagerstown, MD fabrication facility.
This is the second 88 Ton Amada added within the past year and is an integral part of Electromet’s continuing capacity […]
In January 2017, Electromet enhanced its CNC machining capability by installing a HAAS VS-3/50 CNC machining center in its Johnstown, PA machining facility. This CNC can support a machining envelop of 150 x 50 x 50 inches and gives Electromet a significant capability boost.
The extremely large envelop of the HAAS […]
Electromet Corporation was recognized as a Silver Sustaining Member by the Maryland World Class Consortia (MWCC) for twenty years of continuous membership support. MWCC and Electromet are dedicated to the Continuous Improvement journey.
The Consortia is a collaborative effort; a non-profit organization built and sustained through the involvement of state and […]
The ISO 9001: 2015 standard is an evolutionary expansion of the long-standing ISO 9000 series of standards for Quality Management Systems (QMS) in use throughout industry and beyond. The 2015 revision focuses on risk management, leadership, organizational knowledge, performance, effective implementation of procedures and feeding back results so that procedures […]
Electromet is planning to add three CNC Machining Centers to bolster our overall machining capacity in response to significant growth in business volume.
Part of Electromet’s 2014 Continuous Process Improvement Plan called for the addition of several Process Improvement technologies that will serve to eliminate waste in the value stream and that will provide more value to our customers.
These improvements include:
CO2 Laser Engraver – added to eliminate the need for the special technical […]