In January 2017, Electromet enhanced its CNC machining capability by installing a HAAS VS-3/50 CNC machining center in its Johnstown, PA machining facility. This CNC can support a machining envelop of 150 x 50 x 50 inches and gives Electromet a significant capability boost.
The extremely large envelop of the HAAS […]
Electromet Corporation was recognized as a Silver Sustaining Member by the Maryland World Class Consortia (MWCC) for twenty years of continuous membership support. MWCC and Electromet are dedicated to the Continuous Improvement journey.
The Consortia is a collaborative effort; a non-profit organization built and sustained through the involvement of state and […]
In October 2012, Electromet enhanced its CNC machining capability by installing a HAAS VF-9/40 CNC machining center in its Johnstown, PA machining facility. This CNC can support a machining envelop of 84 x 40 x 30 inches and has 3-4 axis capability.
It also installed a HAAS VF-4SS CNC machining center […]
Part of Electromet’s 2014 Continuous Process Improvement Plan called for the addition of several Process Improvement technologies that will serve to eliminate waste in the value stream and that will provide more value to our customers.
These improvements include:
CO2 Laser Engraver – added to eliminate the need for the special technical […]
In June, Electromet enhanced its CNC machining capability by installing a HAAS VF-7/40 CNC machining center in its Hagerstown, MD machining facility. This CNC can support a machining envelop of 84 x 32 x 30 inches and has 3-4 axis capability. Electromet has two machining facilities, one located adjacent to […]